Translate

Total Pageviews

Showing posts with label Anglo-Saxon. Show all posts
Showing posts with label Anglo-Saxon. Show all posts

Monday, 27 June 2016

The Jorvik Cap - 10th C

 I generally leave my head uncovered, except at outdoor events where there is not a lot of shade available. At outdoor event I wear a straw hat with a length of thin linen down the back to protect my neck.

I agreed to teach a couple of classes on sewing and embroidery to some of our newest members and thought a simple head covering that could work for different eras would be a good choice. Easy pattern, simple stitching, and then decorated with the basic embroidery stitches to personalize it. And for new members it would also be their first complete piece of garb, a win win in my opinion.

While looking through the vastness of the Internet I came across a website discussing the Jorvik cap. It looked to be just the thing, and it was only a century or two out of my preferred period to play ( 7th-9th C Anglo-Saxon).

The original was made from silk but I opted for linen for a few reasons.
  1. I do not play a Lord or Lady. I play a peasant or a craftsman class persona.
  2. I had linen on hand.
  3. I have a tendency to overheat easily and decided linen was far more breathable and cooler than the other option of wool
  4. I am allergic to most wools and it would have to be lined anyways, increasing its heat factor.
A couple of websites suggested there was embroidery on the original but looking at the image of the extant item, located at the JORVIK Artefact Gallery, I could find no indication of embroidery at all. The only evidence of embroidery were other people's hoods and the decorations they added.

I decided to try to learn the long armed cross stitch and use it as decoration on my hood along the front edge seam. I had tried the long armed cross stitch before but had failed and moved to something easier.

This effort was no different except after the fourth time of starting and removing the stitching, I placed dots every 1/8th inch. I used a ruler so the line was dots was straight and used a soft lead pencil so the marks will disappear in time and with a gentle washing. With the markings this stitch became much easier to do and get even along the entire length.

I opted for 2 strand tapestry wool, 4 strand separated into 2 strand, for the decorative stitching. Once the crosses were done I decided to go back over the X's with a bit of wool to give it a little extra punch. I chose green and yellow as those are the primary colours in my SCA heraldry.

Now that I have done this hood, I am thinking about making a pointed hood just for some variety. I have seen them referred to as the Dublin Viking Hood or the Dublin Cap. I have found several pages that discuss them and show the site owners recreations but have not, yet, found an image or the original or the recreation in a museum. I will, of course, keep looking.

Wednesday, 26 August 2015

White Wolf Fian: Tools I used for this project

It was pointed out to me that I neglected to show pictures of the tools I used for this project. This post rectifies that mistake.

Here are all the tools I used for this project, except for the modern steel straight chisel. Instead I included the hand made one that I used for part of the project, until I realized that the edge would not stay sharp like the modern steel. The modern chisel was exactly the same shape and size as the hand made tool.







Full List of Tools:
  • Jar of Wood Ash.
  • Strip of heavy wool.
  • Hacksaw blade mounted into a Medieval Saw frame.
  • Lee Valley Brand Carving Knife.
  • Modern files one fine and one with both course and medium teeth.
  • Large Handmade Twist Drill mounted into a handle.
  • Small Handmade Twist Drill mounted into a handle.
  • Small hand made straight chisel mounted into a handle.  
I included the hand made ring and dot tool though it was never actually used for the actual White Wolf Fian Bone Strap End Replica.


Tuesday, 28 April 2015

WWF - Replica Bone Strap-End Progress and Final


 I tried drawing the interlace pattern directly onto the bone but had a hard time getting it to look anything like the original. In the end I traced the original onto the bone using a light graphite transfer paper and a print out of the original from the book.

Here I have done the very basic etching using the tip of my knife to scratch along the drawn lines. I had to etch all the lines at once as the graphite rubbed off the bone very easily.

It is kind of hard to see in this photo but the indented area on the back of the strap has been started. I used my knife to etch a straight line and then a file to actually start removing bone material. I had a hard time keeping the file straight. I clamped a metal ruler along the line and used that as a file stop (used similarly as a plane stop for wood), which allowed me to make the first few passes straight along the line. Once the first few passes were made the lip of the bone served as a file stop.

The deeper carving has begun. I am using a Ramelson Wood Carving Palm chisel to do the deeper cuts and shaping on the carving.

My homemade chisel was not staying sharp long enough to really do the detail work. I will be trying to make another set of tools this summer using tool grade steel rather than the softer steel used for the first run tools.

As I carve the details deeper, I am also going over the frame line more and more to make it deeper than it was before.

 More detail carving done. I originally estimated I would need 60 hours to complete the entire reproduction. At this point I was very near that time limit already.
 The front is finished. At this point I had spent nearly 80 hrs on the replica. That included cutting the bone stock, shaping the strap-end, and doing the carving on the front.
 The back is started. Like the front, I had to trace the lines onto the bone and give them a rough etching with my knife blade to keep from rubbing them off.

The inside of the bone seemed a bit softer than the front. The etching was much easier to complete and the deeper lines, especially the straight lines went much faster.
The interior details have begun. I still can not decide if they are fruit, birds, or human faces.

The red stain is actually my own blood. There is a saying among wood carving that it isn't done until you have bled on it. Well, I bled a lot. While making one of the cross cuts the chisel slipped out of the groove and right across my thumb. I wiped away the blood and found that it had filled the grooves in the bone. After I took the photo I had to take a toothbrush to the groves to remove the rest of it.
 The carving on the back is finished.
 Here is the back of the finished strap-end all cleaned up and polished. You can see the glossy look as I hold it tilted slightly to the light. I used fine wood ash, water, and a piece of wool fabric to polish the bone.
And the front of the finished strap-end. The gloss does not show as well in this picture but it was taken on the same day at nearly the same time as the above photo. The polish did not work as well on the deeper carvings of the front but it still looks nice.

From start to finish this project took about 120 hrs to complete. Spending that much time really makes you appreciate the art and skill of the craftsmen of the 10th Century.

Once I have gotten over the "Never want to look at bone again" attitude I developed during the making process, I want to make a bone buckle that ties into the strap end in some way. Perhaps I will replicate the interlace or perhaps it will have the bird faces on it. I don't think the buckle will be done this year.




This is a photo of the original strap end taken by a visitor to the Museum and posted on Flicker. It shows the details, especially the ladder etchings much more clearly than the photo obtained from the museum directly (see second photo).

In retrospect, comparing my reproduction to the photo of the original, I can see that I made my carving far deeper than the original. Perhaps when it was brand new the original had deeper lines but I do not think so.

I opted to NOT recreate the ladder etchings. I suspect in the original it was added to make it more obvious which straps were up and which were down in the carving. Due to the depth of my carving and the relief aspect that I used, the ladder etchings are not a requirement and I did not feel that they would add anything to my piece.

At a later date I may decide to add the ladder etchings but for now I am done with my replica.

Sunday, 23 November 2014

QPT2 - Non Rigid Heddle Brocade

Brocaded Non-Rigid Heddle Band
QPT 2014


Entrant: Kaolin Konalsdottir
Category: Textile Arts – Inkle Weaving

The Project
I chose to make a non-rigid heddle (a.k.a. Inkle) brocade band, using a brocade pattern from the early period. The loom is a basic inkle loom. The heddles are lengths of string looped around one of the pegs of the loom.

Materials:
Linen thread
Gold Metallic DMC embroidery floss

It is my hope to use this piece as either trim for an outfit or possibly, assuming I manage to get enough length, as a belt for a dress.

The Inspiration
While doing research on appropriate trim for an early period persona, I came across images of brocade trim made with tablet weaving, silk, and flat silver or gold ribbon. I wanted to make something that would fit both my persona, a crafts person in early Anglo-Saxon Northumbria, and was some I could make myself.

While researching the brocade technique I came across an article on early period metallic trim by Carolyn Priest-Dorman “Metallic Trims for Some Early Period Personae”. There were several patterns in the article but the one I liked the best was the Birka 6 pattern.








Deviations from Period
I chose to make the background out of linen rather than silk. Silk is quite far out of my budget at this time. Linen and wool are period fibres that could have been used for the background fabric for bands, though little if any have survived. A fine linen was easier to find than a fine wool so I chose the linen.

Another material choice I made was to use metallic DMC embroidery floss rather than the wide, flat ribbons more commonly seen in brocade. This choice was based on availability and cost. It is likely that I was not using the correct search terms for the wire but I was not able to find anything that looked like the extant examples.

I did initially try to use jewellers brass wire but found it was stiff and prone to kinking making it hard to use effectively. Hammering it to flatten it only made the wire more brittle and impossible to use. Fighting with my materials seemed as daunting as fighting with my techniques so I dropped the wire idea and chose a flexible metal looking fibre instead.

The biggest deviation from period was the choice to use a tabby weave (one up, one down) for the background, rather than tablet weave. I am not as comfortable with tablet weaving and trying to learn to brocade on a tablet woven band, while trying to manage the weaving itself seemed daunting to me. Instead, I chose a background that I was far more proficient with. This way there are no mistake in the background to detract from the brocade pattern itself.


The Process
My first order of business was the take the black and white pattern and convert it into a graphed image that I could then use for the pickups. This involved estimating the number of warp threads based on the width of the single dots. Once that was done I simply copied the pattern to the graph paper and colour coded it to make it easier to see the pick ups themselves.

A border was added to the pattern to hide the loop around of the metallic thread. This made the pattern a total of 20 warp threads wide. The tape at the bottom of the pattern is sticky on the two ends and keeps me from loosing my place in the weaving process. I move it to the current line, working my way up from the bottom, to make a full repeat.

A few straight tabby weaves were done, before the actual brocade began, to give myself a border at the beginning of the band. During normal weaving this is the area were the width of the band is set by gradually pulling the weft threads tighter in each subsequent pass.

In the case of brocade, there are two shuttles. The first carries the background fibre, in this case the red linen. The second carries the brocade fibre itself, this time a DMC embroidery floss. I should have made a few passes with just the background fibre instead of both the background and the brocade fibres.

The loose threads you see in the back ground of this image is one of the unwoven layer of warp threads and not mistakes or dropped warps.


To make a single pass of the background weft, the shed , the space between the heddled and unheddled warps, is opened by pushing down or up on the unheddled threads, a weaving sword is pushed into the space and twisted to cleanly open the shed. With the weaving sword I use the shed is approximately 1.25 inches wide allowing a clean pass of the shuttle.

The weft is pulled through leaving a small loop on the side the shuttle was passed from. At this point the weaving sword, or weft beater, is used to push the new weft tightly against the old ones. After the threads are firmly packed the short loop is gently pulled tight.

The order of operations is to make one pass of the background colour, followed by a single pass of the brocade colour. Back and forth along the length of the weaving.



Un-heddled warps being pushed down








Un-heddled warps being pulled up.












A clean open shed, ready for a shuttle pass.






The process for doing the brocade is a little more involved. First, all the warps have to be side by side before the pick ups can be done. This prevents the accidental picking up of extra warp threads.




 Then using a pointed stick, each warp thread that the brocade fibre goes UNDER, is picked up. If the warp threads are bunched up it is very easy to pick up the wrong number of warps, and you will not know until you have reached the left side of the pattern. Having a border made it much easier to see if my counts were off, as I always had to drop two and pickup three.



 The stick is used to lift the picked up warp threads and the weaving sword is slipped through the shed once more. This weaving stick is knife shaped, square on the back side and wedge shaped at the front, to make it easier to pack each pass of the wefts. This makes for a smoother band and helps the brocade really show nicely against the background colour.



 Beater in Place.




As with the background weft, the brocade weft is packed tightly against the previous pass of the background colour while there is still a short loop on the side passed from. This is then taken up before the next weft pass.




Side loop being shown.





What I learned
  • The initial end of the weaving should only be done in the background colour. This will give a smooth selvage at the beginning and make it easier for the addition of hardware if needed.
  • The width of normal inkle weaving is pulled tight enough that the weft passes can not be seen. With brocade that is not the case. The warp threads need to be equidistant, laying neatly side by side, to allow the brocade weft to show correctly. Comparing earlier repeats that do not show the pattern as well, to later repeats that do show the pattern fairly well you will notice quite a bit of difference between the width of the band – 3/4 inch compared to 7/8th inch. It doesn't seem like a lot but the wider section looks much nicer than the narrower section.
  • The brocade weft needs to be thicker than the background weft. I figured this out during the first few passes of the brocade. A single twist of DMC floss barely showed against the background. After I removed the initial passes and doubled the DMC floss the brocade showed much better.
  • As much as the doubled DMC floss looks okay, I want to use a single, thicker weft for my next brocade band. Where the two floss lay beside each other in the pass the brocade effect is much smoother and more noticeable against the background. Where the two twists of floss cross over each other in the pass the brocade is less noticeable and does not fill out as nicely.
  • As silly as it seems one thing I learned is to double tie my warp threads. In the process of sliding my band forward a couple of the warp threads became untied, making those warps loose. I managed to retie one but was not able to find the other end of the other thread. As a stop gap measure I pulled the loose warp snug, tied it to another warp and place a wrapping of masking tape around the ends to keep the warps evenly snug.

Conclusion
I really like the colour of the gold on the red and if I get enough yardage I think it will make a very lovely trim for a court tunic. I hope to find a more suitable brocade fibre than doubling up DMC floss. I think a thicker gold cord would look much better than the floss.

I have seen images of other peoples efforts where they used a flat wire but have yet to find a source for this. If silver and gold wire was not so expensive I would try once more to make my own flat wire by hammering out would wire.

I think now that I have learned the basic technique for brocading it is time for me to try brocading a tablet woven band. With any luck I will be able to find a nice thin wool thread to use for my warp and background wefts. With a fine enough background thread a single length of the DMC will look good and allow me more practice before investing in gold or silver flat wire.


References

Historical Relevance
  1. CROWFOOT E, HAWKES S. Early Anglo-Saxon Gold Braids. York: Archaeology Data Service (distributor)Available at: http://archaeologydataservice.ac.uk/archiveDS/archiveDownload?t=arch-769-1/dissemination/pdf/vol11/11_042_086.pdf. Accessed November 13, 2014.
  2. Metallic Trims for Some Early Period Personae, Carolyn-Priest Dorman, Cs.vassar.edu, (2014). Metallic Trims. [online] Available at: http://www.cs.vassar.edu/~capriest/metaltrims.html [Accessed 13 Nov. 2014].
  3. Walton Rogers P. Cloth And Clothing In Early Anglo-Saxon England, AD 450-700. York: Council for British Archaeology; 2007. pg 96-97
  4. Mayhew C. Viking Age Tablet Weaving. 1st ed.; :13.
Techniques
  1. JOHNSON N. Pick-Up Or Brocade Weaving On A Simple Heddle Loom. 1st ed. Available at: https://www.cs.arizona.edu/patterns/weaving/articles/tw_3_2-03.pdf. Accessed November 15, 2014.
  2. Cook M. Tablet-Woven Brocade. WeaveZine. 2008. Available at: http://www.weavezine.com/content/tablet-woven-brocade. Accessed November 13, 2014.
  3. DeGarmo T. Inkle Weaving. Degarmonet. 2005. Available at: http://www.degarmo.net/inkle/notes/brocade.html. Accessed November 13, 2014.


















Saturday, 18 January 2014

Trillium Exchange #10: The finished product

And I am done. The carving is complete, the brass has been added, the hinges are on, and it has been oiled repeatedly with tung oil. Now all I have to do is let the oil cure for a week or two and it can be shipped off to it's new owner.

Besides the obvious change of using chip carving rather than bas relief, I also chose to use commercially purchased hinges. The brass plate in the front should be a small lock, if the missing piece in the front of the original is anything to judge by but I simply added a small brass plate for decoration. And finally, because of the extra space at the bottom of the images I added a line from the Anglo-Saxon Rune Poem in Old English and transliterated it into runic script.

The line I chose was the very first in the poem:
Feoh byþ frofur fira gehwylcum;
sceal ðeah manna gehwylc miclun hyt dælan
gif he wile for drihtne domes hleotan
 
Which translates to:
 
Wealth is a comfort to all men;
yet must every man bestow it freely,
if he wish to gain honour in the sight of the Lord.


As I mentioned in my last post there are several things I would like to do differently in the future:

1) I will build the box to the proportions of the photo rather than to the dimensions, or as in this case to the dimension of the wood.

2) I want to make the brass hinges myself with the repousse decoration that can be seen on the original.

3) I want to carve the figures in bas relief as in the original.

4) I would like to make a working lock that can be installed into the box.

5) I want to cut the box from a solid block of green wood and do the carving while the wood is still wet. I think it will make a difference in the ability for the wood to hold detail.

Now mind you, it is going to take lots of practice to get to the point where I can make a finished product that looks like I think the original looked when it was brand new. I have to practice my relief carving, preferably by making plaques of each side of the box. I have to research and learn how to make small period locks and of course spend some time practicing. I have to make the repousing tools and learn how to do it. And, of course I need to learn how to make hinges.

This is going to be a lifetime project. But, with luck and lots of practice I will end up with a near perfect replica of the original in pristine condition before I die.



































Saturday, 4 January 2014

Trillium Exchange #9: Progress

Finally some positive progress on my exchange gift. The decoration on the lid have been completed and the decoration on the box body has been started. I have learned a few things along the way and can already see myself redoing this box at a later date.

Since the bas relief was not working out I decided to use chip carving to outline the figures. The chip carving is going much faster which is a good thing since I want to have the project finished and in the mail by Jan 30. Once oiled, as the lid is now, the figures look awesome and I am really happy with the outcome. I think Rylan will be pleased as well, even if it is not a perfect replica of the original.

When I started on the box I realized the proportions of the box are different than those of the original. I new they were a little off because I chose to go with 4 inch sides but the measurements provided on the Museum website were 6 x 3 x 3 inches, but judging by the proportions in the images the original base is 3 x 2 and the lid is 1.5 or 2 at the peak. To make my box the same proportions I am carving the images so that there is a wide border at the base. I am then going to use a line or two from the Anglo-Saxon Rune Poem to fill in the wide border after the carving is all done.

My next attempt at this box will be very different. Instead of building the box to the size wood I have or to the size listed on the website, I plan to build it as close as possible to the proportions shown in the photos. I also plan to do the next one in bas relief. Not only to make a more accurate reproduction but to practice my relief carving.

I am finding myself completely obsessed with the box. I think about it constantly. I think of ways to improve my methods of construction, my relief carvings, my proportions, and even think of ways to recreate it perfectly by starting with a solid piece of green wood, instead of building the box and lid from commercial slab wood.

While I have not thought much about the hinges or lock for this currently project I do think about them for the next generation version. I want the hinges be hand made and to have the repousse work that is barely visible on the one remaining piece of the hinges. The lock is completely missing in the extant piece so I have been trying to find out more about box locks for the Anglo-Saxon period so that I can eventually reproduce that as well.


Wednesday, 25 December 2013

Largess: Gift Giving at it's Finest

I've been busy the last few days procrastinating on finishing my Trillium Exchange entry by creating Largess for an upcoming Dirty Dozen Largess Competition. But I seem to have become rather addicted to making things, twelve things, to give away to the Kingdom and to my Barony.

Largess is anything that is donated to the Kingdom or Barony that can be regifted to other people to show appreciation or  congratulations and that enhances the experience, feel, and atmosphere of the medieval game. Some people makes things that feel medieval or are replicas of something medieval. Others purchase items with the same effect. However, it seems to me that more people make their gifts as opposed to purchasing them.

The Dirty Dozen Competition is a Largess competition where the entrants, either individuals or groups, choose a theme and then enter twelve items for that theme. Some people will do twelve different items, while others will simply make a dozen of the same thing. Each entrant then chooses whether the Largess go to Kingdom, Barony, or split between the two. Our new Baroness is hosting this event to not only show off the artisans of out Barony but to also fill the coffers of the Barony and the Kingdom with items that can then be shared around to the rest of the known world.

The first thing I did when I decided to participate, after promising our Baroness that my Canton would help if I had to drag them kicking and screaming to the event, was to join the Largess group on Facebook. I got lots of ideas from the files section. Ideas for things that would be easy to make and relatively inexpensive that felt Medieval. I also found a few ideas for actual Medieval things that were easy to reproduce as long as you were willing to make a few pieces that were not of a decent quality but taught you the skills you need to make them. It also helps if you are a little insane about doing Arts and Sciences and willing to try your hand at anything at least once.

With ideas in hand I started thinking about themes and deciding on whether to do individual or group entries. After discussing with other members of my Household I decided I was going to do both individual and group entries. It is a well known fact in our Canton that I am slightly insane and totally gung-ho for any and all Arts and Sciences, so really no one was surprised when I announced I was doing both and asked the Canton to make a group entry as well.

My first individual entry is Archer's Abacuses.We have a lot of archers in Ealdormere and Skraeling Althing and I really liked the Archer's Abacus idea because I know it is hard for me to score my arrows, find missing arrows, and chat with others on the field at the same time. I figured if I needed the abacus then so would other people.

The Abacuses are very easy to make and can be as cheap or as expensive as you choose to make them. I found some painted, wooden beads at the local Dollarama, used some waxed linen cord I had with my leather working supplies and went to town. Ideally, I would have preferred to make the beads the colours of the Kingdom and Barony respectively but I could not pass up the deal on the beads. Each string is 30 beads long with the colours in sets of 5 to make it easier to tally at the end of the round. Since I was able to get some larger square beads I chose to use them at each end of the string so the archers can attach the strings easily through a loop or under their belts. Since the beads were so cheap I was able to make twelve for Kingdom, twelves for Barony, and I still have 13 left over to be used as site tokens or Largess for the Canton.


My next idea was to make Temple Rings with beads and wire based on the article found here. 1) I like playing with wire and 2) There are a lot of resources for people playing later period English, French, and Italian in our area but few for those playing Dark Ages and / or Eastern Europe. The packaging is some boxes that were purchased years ago for my business but having not used them I decided they worked for presenting and storing my Largess items. Writing the information on the inside lid and designated recipient (Kingdom or Barony) was just as excuse to practice my calligraphy while accomplishing something useful at the same time. Because I made twelve each for Kingdom and Barony.

My next project was to make some replica Anglo-Saxon rings. My reasoning, see the above paragraph. Wire and early period are all the excuse I needed but it turns out that there are some really easy wire wrap type rings that date from the Anglo-Saxon period. I was amazed when someone on the Largess forum linked to a museum showing a very simple wire wrap ring. Here are just a few of the images for wire wrapped rings from the Anglo-Saxon period.

http://news.bbc.co.uk/2/hi/uk/8272370.stm
http://www.obsessionistas.co.uk/historical-artefacts/0018-buried-treasure/9715903
http://www.time-lines.co.uk/anglo-saxon-twisted-wire-finger-ring-011013-22852-0.html
http://www.ukdfd.co.uk/ukdfddata/showrecords.php?product=13944&cat=205
http://www.ukdfd.co.uk/ukdfddata/showrecords.php?product=29806&cat=205
http://www.ukdfd.co.uk/ukdfddata/showrecords.php?product=27643&cat=205
http://www.ukdfd.co.uk/ukdfddata/showrecords.php?product=25909&cat=205
http://www.ukdfd.co.uk/ukdfddata/showrecords.php?product=25909&cat=205
http://www.britishmuseum.org/research/collection_online/collection_object_details.aspx?objectId=1341148&partId=1

Pretty freaking cool that I can now make myself authentic looking jewelry for my early Norse/ Pict/ Anglo-Saxon persona just from some wire that I already have. Of course I am using brass and coloured copper but eventually I want to try making myself one of the rosette rings from sterling silver. So far I have only made 12 of the rings and am trying to decide if I should go ahead and make twelve more or just give 6 of each to the Kingdom and Barony. Making more will take time but it will give me more practice and make my chances of making a nice one of silver that much better later on.

Another gift I have planned but have done little more than purchase the supplies is to create sampler packs of Medieval Spices. the sampler pack will include 9 spices, mostly hard to find spices, and a little booklet containing a recipe for each spice. I purchased most of my spices from The Silk Road Spice Merchant in Calgary, Alberta and a couple from Herbie's Herbs in Toronto, Ontario. The spices I chose were based on Medieval Cookery's list of essential spices for Medieval cooking and include Ceylon (Sri Lankan) Cinnamon, Cubeb Berries, Lesser Galingale, Grains of Paradise, Hyssop, Summer Savory, and Saunders (Red Sandlewood). I would love to include Saffron in that list but true saffron is very expensive. Instead I am going to include Green Cardamom and Sumac. If I run out of any of these spices during the assembly I will use Rosemary, Oregano, and Coriander as suggested by other members of the Largess group.

My final entry will be with other members of my household - House Adis North. The theme we have chosen is items that would have been taken on Crusade. Some people are doing banners, others are doing chests, and I have decided I am going to do Paternosters, an early form of the modern Rosary used by Catholics around the world. I have only just started researching and looking at period examples but I think I have decided on wooden beads, if I can find enough, strung on silk yarn I got in a box of partial skeins from the Potsdam Artist Council sale last year. I am still trying to decide if I am going to use a tassel or a charm of some kind on the end.