Translate

Total Pageviews

Friday, 15 November 2013

A&S 50/50 Challenge: Cap #7

 Wool Cap #7

Brand of Wool: Bulky Wool - Bernet Roving I believe
Colours: Blue/ Grey
Stitch:Oslo
Notes: I made this hat very large so it could be felted. I still have the "spike" on top. I am definitely not increasing enough in the first three or four rows. After felting the hat is quite stiff and doesn't mold around my head when I wear it like some of the others. I believe this is due to the thickness of the original yarn and the thickness of the fabric after it was felted. Over all, I am not terribly pleased with this hat though the colour is awesome.

Thursday, 14 November 2013

A&S 50/50 Challenge: Cap #6

Wool Cap #6

Brand of Wool: Lion Brand Fisherman's Wool
Colours: Brown
Stitch: Mammen
Notes: Mammen Stitch with F2 connection. Again I did not add enough at the start so I have this weird little "spike" at the top of my hat. I need to go through Hald's section on nalbinding to verify which stitches I have to include from her notes, along with other stitches used elsewhere prior to 1000 A.D. Once I have made sure I have all of the documented stitches I can start working on stitches that are still in use in Finland.

At this point I believe the stitches I need to do are: Coptic, Danish, Oslo, Mammen, Broden's, Aisle, York, and Finish Turn. But I will not know for sure until I verify and find documentation on each.


Trillium Exchange: #5

I've been rather remiss in documenting the creation of the box, which will eventually be carved with scenes of the life of Christ. I will Also trying to make a pair of brass hinges decorated like the single piece on the extant box. I have about a month and  half left to get the box finished and into the mail. Here are some photos of the progress and completed box, along with one of my first hinge trials.






Tuesday, 29 October 2013

Trillium Exchange: #4

I tried open sand casting this pattern but I failed. I mixed two packages of molasses with the sand to make it hold the pattern and packed it firmly into a form. However, when I pressed the sculpey forms into the sand they broke. After removing the forms from the sand I realized the sand was to course any way to successfully take the amount of detail in the forms themselves. Even the really simple one did not work in the course sand.

To find and purchase the required molding compound will cause me to go over the $25 limit set my the organizers. I am also feeling like the time is slipping away from me since the project is due in February. As such I have now reverted back to another project I had in mind. A box carved with a scene of some nature. I have cut pieces of red cedar and will build a box as a base for my carving, Should that fail I have ordered some pieces of Linden (Basswood) which I know are fairly straightforward to carve.

The inspiration came from a box found at an Antiquities Dealer's shop. It is a greenwood carved box made from a solid piece of wood, with scenes from the birth of Christ on it. Since the SCA tends to discourage religious imagery I have asked the organizers to get Rylan's preference. If she wants religious, I will do religious. Otherwise I plan to carve a scene from Beowulf, a classic Anglo-Saxon Myth.

Trillium Exchange: #3

I have definitely decided I want to make a strap end based on one I found at the British Museum's Online Collection. The moment I saw the strap end I fell in love and thought it would make a very appropriate gift for a Anglo-Norman Lady, if I could make a decent replica or at least something close to the right size and shape. AS a backup plan I also cut out the wood for a small cedar reliquary box that I could carve a scene from either the life of Christ or a Saint, as was common in the day.

My initial efforts to recreate the strap end in wood failed. The original is only 4 cm long and has a lot of detail in it. While I was able to cut out the shape, I was unable to carve in the amount of detail required to make something I would be proud to gift to someone of Rylan's status. I have been told to ignore her status, but I can't help but feel the gift must live up to her and be something she would proudly display every day.

Earlier this year we bought some bronze grains and some pewter grains, with the intention of making a soap stone mold and learning the art of metal casting. The same problem arose with the soapstone mold making as it did with the wood. I was not able to carve the required detail into such a small surface area. Creating the carving in reverse also is far more difficult that I expected.

Now that I have decided I must at least attempt casting a strap end I moved on to Plan B - Sand Casting. I dug out my old, stale, Sculpey and went to work creating a 3D model of the piece. Even using something as easy to use as Sculpey, this turned out to be far harder than expected. I know 3 cm is just over an inch long but apparently my fingers can not, or will not, work with something that small regardless of the medium. On to Plan B.a - Create a mold that looks reasonably decent and as small as possible, which turns out is about 7 cm. It isn't an exact replica but I would call it a very good "inspired by" piece.

Now I just have to mix some fine sand with some molasses, as recommended by the Spouse who has read up on sand casting. Something about it making the sand hold the details better and the heat from the bronze will heat up the sugar and form a film that will make the finished piece release more readily.

Unlike the sand casting methods that the Spouse has investigated before, I plan to press my Sculpey model into a layer of sand and pour the bronze into it. The back of the model, and the inspiration, have flat backs so there is no need to do a 3D casting. I may move on to a 3D casting if my idea doesn't work. The great thing about my mold is it is reusable and so will afford many attempts.

Should the sand casting fail all the way around I will move on to lost wax casting. I hope I can make a wax mold as easily as I did the plasticine one. I also hope I can make the wax mold smaller, at least a little closer to the original's size, while maintaining the level of detail I want.



A&S 50/50 Challenge: Cap #5

Wool Cap #5

Brand of Wool: Lion Brand Wool
Colours: Yellow
Stitch: Mammen
Notes: Started with the Josephine Knot but for some reason the hole pulled open during work. I was able to stitch it closed but there is still a larger than normal hole at the top. I think I created the slip knot backwards so that the working thread did not pull the slip know tighter to keep it closed.




A & S 50/50 Challenge: Cap #4

 Wool Cap #4

Brand of Wool: Lion Brand Fisherman's Wool
Colours: Oatmeal
Stitch: Buttonhole
Notes:
Started with the Josephine Knot like before but the increases didn't work out as nicely as the previous attempt. The top few stitches are Tarim so perhaps that caused the problem. The Brown and oatmeal braid is made with the Oslo stitch. I was not as careful with my stitch counts so many of the loops look awkward and uneven.